Table of Contents
| 1 | Getting started |
| 2 | Initial setup |
Connecting directly over Ethernet
Connecting over a local area network
Connecting to a computer over wireless
Connecting with iOS version 8.4.1 and older
Connecting with the TP-Link Wireless Router
Exploring the analyzer control unit
More details on the survey chambers
More details on the long-term chambers
Tips for using the 8100-104C clear chamber
| 3 | Making single-chamber measurements |
Using the auxiliary sensor interface
| 4 | Overview of the LI-8150 multiplexer |
Using the AC-to-DC power supply
LI-8100A and LI-8150 cable connections
| 5 | Using the multiplexer |
Multiplexed measurement tutorial
Long-term measurements checklist
| 6 | Transferring data from the LI-8100A |
Transfer data over a serial, USB, or network connection
Transfer data from the CompactFlash card
| 7 | Calibrating the LI-8100A |
Carbon dioxide and water vapor gas standards
Setting the span: Carbon dioxide
| 8 | Troubleshooting |
System will not power on or powers on incompletely
Connection and communication problems
Measurements stop immediately after starting
| 9 | Maintenance |
Analyzer control unit maintenance
10 cm survey chamber maintenance
Replacing the bellows on the 10 cm chamber
20 cm survey chamber maintenance
Replacing the bellows on the 20 cm chamber
Replacing the shaft seal assembly
Changing the clear and opaque chamber bowls
| 10 | Customizations and other applications |
| A | Specifications |
10 cm survey chamber: 8100-102
20 cm survey chamber: 8100-103
Survey and single-chamber accessories
| B | Software compatibility table |
| C | Pin assignments |
| D | References |
Instruction Manuals
A Quick-start Guide to Survey Measurements
(8100A_Manual_Field_Guide_11411.pdf)
Shows how to connect with a computer, iOS, or Android device and configure a survey measurement.
(8100A_Manual_11123.pdf)
Comprehensive instruction manual to operate the LI-8100A.
CO2 Mapping Kit Instruction Manual
(8100-405_Manual_CO2_Mapping_Kit_12425.pdf)
Instruction manual to use the 8100-405 CO2 Mapping Kit with the LI-8100A system.
Sistema Automatizado de Flux o de CO2 no Soloe Multiplexador LI-8150 Manual de instruções
(8100_Manual_Portuguese_Translation_15611.pdf)
LI-8100A Instruction manual translated to Brazilian Portuguese.