Useful Part Numbers
Quantity is “1 each” unless otherwise stated.
Standard spare parts kit |
9964-015 |
Drierite desiccant (1 lb bottle)a |
622-04299 |
Soda lime - wet (450g bottle) |
9964-090 |
Ascarite II (500g bottle) |
9970-022 |
Air flow muffler |
300-03707 |
Small O-ring (seals air passage to console) |
192-02597 |
Large O-ring for end caps |
192-04291 |
Chemical tube assembly (entire) |
9964-021 |
Threaded tube only |
6564-076 |
Bottom end cap |
6564-071 |
Labels for desiccant and soda lime tubes |
250-04296 |
Tygon tubing (material for small bypass tubes) |
222-00302 |
Flow adjust knob |
9864-075 |
Set screw for flow adjust knob |
142-00109 |
Battery |
6400-03 |
10 Amp fuse for 6400-03 battery |
438-03142 |
Male connector (as on the battery) |
318-02031 |
Female connector (as on the console) |
318-02030 |
Cable (5 ft) and connectors for charger - console |
9960-062 |
Cable (10ft) and connector for external battery |
9960-120 |
Balston air filter |
300-01961 |
1/8” ID quick coupler, female |
300-04269 |
1/8” ID quick coupler, male |
300-04270 |
Replacement air pump |
286-04198 |
Air pump repair kit |
6400-907 |
Bev-a-line tubing (per foot) (1 box = 50ft) |
222-01824 |
Lower chamber exhaust tube |
6564-154 |
1/4” OD Quick Connect straight union |
300-03123 |
1/4” OD Quick Connect “Y” |
300-03367 |
Clock battery (keeps time while power off) |
442-03791 |
3A, 250V, fast blow (5 x 20 mm) |
439-04215 |
5A, 125V, fast blow (5 x 20 mm) |
439-04214 |
1A, 250V, fast blow (5 x 20 mm) |
439-04216 |
Screws (16 required) for holding bottom shell |
122-00007 |
4-40, 1.75" hex screw for attaching chamber |
140-04251 |
Leaf Temperature Thermocouple |
6400-04 |
Propafilm (10" wide, order by length) |
250-01885 |
Double sided tape (per foot) |
212-04341 |
Gaskets: 2x3 chamber and 3-hole (10 sets) |
6400-30 |
Gaskets: 2x6 chamber and 3-hole (10 sets) |
6400-32 |
Gaskets: 6400-05 Conifer chamber (5 sets) |
6400-31 |
Gaskets: 6400-02B LED source. Includes 20 white gaskets, 5 black neoprene gaskets for the lower chamber, and 5 3-hole gaskets. |
6400-33 |
Gaskets: 6400-40 LCF |
6400-41 |
Needle holding gaskets (5 sets) |
6400-34 |
Teflon tape (3.5" wide, order by length) |
212-02314 |
Upper half of std. 2x3 chamber |
9964-028 |
Lower half of std 2x3 chamber |
9964-029 |
Upper half of 2x6 chambers |
9964-052 |
Lower half of clear bottom, 2x6 needle chamber |
9964-051 |
Lower half of 2x6 narrow chamber |
9964-050 |
O-ring (smaller) for outer air passage |
192-04357 |
O-ring (larger) for inner air passage |
192-04356 |
6400-17: seal for 2.5 inch pots |
6564-279 |
6400-17: seal for Conetainers |
192-09261 |
6400-17: O-ring for chamber top |
192-09262 |
Entire source assembly for 12 gram cartridges |
9964-026 |
Connector block for CO2 tanks |
9964-033 |
12 gram CO2 cartridges (25) |
|
(includes 9964-041) |
9964-037 |
Spare parts kit for CO2 mixer |
9964-039 |
25 little O-rings, and a filter (Spares kit) |
9964-041 |
Flow restrictor assembly |
9964-042 |
Large O-ring between source and console |
192-01919 |
Latch repair kit (has 6564-057 installed) |
6400-903 |
Chamber catch rod (wire only) |
6564-057 |
Chamber tension adjustment assembly |
6400-908 |
Log switch replacement kit |
6400-904 |
Fan motor (field installation version) |
6400-902 |
Sensor head manifold |
9864-033 |
Vinyl manifold gasket (top of sample cell) |
6564-022 |
Screws for sensor head manifold |
140-04234 |
Vinyl gasket (mirrors) |
6564-021 |
Screws for chamber mirrors |
140-04236 |
Connector screws for chamber/IRGA cables |
314-04913 |
Chamber handle screws |
122-02284 |
Tripod bracket screws |
122-04276 |
Internal scrubber bottles (2), with chemicals |
6400-950 |