Factory Calibration

Recommended Recalibration Frequency: No regular factory recalibration required.

What's included with LI-610 recalibration?

A factory recalibration includes:

Calibration

• Water pump is filled and tested.
• Dew point temperature calibration (2 points).
• Check panel meter accuracy.

Tests and Maintenance

• Test battery.
• Replace internal air filter.
• Clean fan filter and hose barb screen as needed.
• Inspect condenser block.
• Replace hoses and other air supply parts as needed.
• Check and repair any air leaks in the system (inform customer of leaks found).
• Other repairs and maintenance as needed; customers are notified if additional fees are required for repairs.

To request factory service or recalibration for an instrument:

Factory Service or Recalibration

Service will be performed at our US office in Lincoln, NE USA, European office (LI-COR GmbH), or by your local distributor.