Release notes
3.0.0 (June 2023; current version)
- Added Internal Calibration Certificate for new instruments calibrated at the factory. In the ESC Menu, under the Calibration Menu is a new command to display the calibration certificate (ESC > D > D).
- Fixed pitch and roll calculations. Accelerometer output has been adjusted on all board versions to standardize the pitch roll calculations. The accelerometer X direction is aligned with the North-South vector, the Y direction is aligned with the East-West vector. Pitch and Roll value range is ±180 degrees.
2.3.1 (August 2022)
- Update to bootloader to fix issue with factoryreset command corrupting the parameter memory.
2.3.0 (July 2022)
- Reduced the occurrence of large deviations from the data output.
2.2.2 (April 2022)
- Added commands to record and remove ultrasonic noise transmitted through the rings.
- Increased the length of the TriSonica ID to accommodate UUID.
- Adjustments to the diagnostic command.
2.1.0 (February 2022)
- Adjusted shadow correction algorithm.
- Added firmware build number to version board command.
2.0.2 (October 2021)
- Initial release of the TriSonica Sphere Firmware.