Application Notes, Tech Tips, and Other Documents
| Summary | ||
|---|---|---|
| Calibration Procedures for LI-COR Spectroradiometers, Radiation Sensors, and Lamps | This application note summarizes LI-COR factory calibration procedures for all quantum sensors, photometric sensors, and spectroradiometers. | application note |
|
Immersion Effects and Cosine Collecting Properties of LI-COR Underwater Radiation Sensors |
Application note describing how to correct for immersion effects in order to obtain absolute values of irradiance under water. |
application note |
| Principles of Radiation Measurement |
Brochure describing the fundamental principles of light and radiation measurements using light sensors. |
brochure |
| Using the 2420 with photometric sensors | Installation instructions for the 2420 light sensor amplifier and the LI-210 and LI-210R photometric sensors. | install guide |
| Using the 2420-BLS Light Sensor Amplifier with long-term soil CO2 flux chambers and the LI-8150 multiplexer | Installation guide for light sensors using the 2420 amplifier with the LI-8100A system. | install guide |
| Using LI-COR light sensors with National Instruments wireless sensor networks | Technical note describing how to use LI-COR light sensors in National Instruments Wireless Sensor Networks | technical note |
| LI-210R Photometric Sensor Instruction Manual | Instruction Manual for the LI-210R Photometric Sensor. | manual |
| LI-COR Terrestrial Radiation Sensors Instruction Manual |
|
manual |
| Creating a wireless light sensor network with Particle Argon platform | Describes how to create a Wi-Fi sensor network that automatically posts results to a Google Note using off-the-shelf components. | tech tip |
| Using LI-COR light sensors with National Instruments wireless sensor networks | Technical note describing how to use LI-COR light sensors in National Instruments Wireless Sensor Networks | tech tip |
| Connecting LI-COR light sensors to voltage-reading data loggers | Tech tip that describes how to connect a light sensor to a voltage reader or datalogger. | tech tip |
| Amplifying the Output Signal from LI-COR Radiation Sensors | Technical tip describing how to amplify the signal from LI-COR radiation sensors for use with other manufacturer's data logging devices. | tech tip |