Application Notes, Tech Tips, and Other Documents
Summary | ||
---|---|---|
Underwater Sensor Cable Connections | Technical tip that describes proper cable connections for LI-192 and LI-193 Underwater Quantum and Spherical Quantum Sensors. | application note |
Calibration Procedures for LI-COR Spectroradiometers, Radiation Sensors, and Lamps | This application note summarizes LI-COR factory calibration procedures for all quantum sensors, photometric sensors, and spectroradiometers. | application note |
Immersion Effects and Cosine Collecting Properties of LI-COR Underwater Radiation Sensors |
Application note describing how to correct for immersion effects in order to obtain absolute values of irradiance under water. |
application note |
Principles of Radiation Measurement |
Brochure describing the fundamental principles of light and radiation measurements using light sensors. |
brochure |
Using the 2420 with quantum sensors | Installation instructions for the 2420 light sensor amplifier and the LI-COR quantum sensors. | install guide |
Underwater Radiation Sensors Instruction Manual | Instruction manual for the LI-192 and LI-193 Underwater Radiation Sensors. | manual |
Using LI-COR light sensors with National Instruments wireless sensor networks | Technical note describing how to use LI-COR light sensors in National Instruments Wireless Sensor Networks | tech tip |
Preventing Negative Readings with LI-COR Light Sensors | Tech tip that describes why you might get negative readings from a LI-COR light sensor and how to solve the problem. | tech tip |
Using LI-COR Millivolt Adapters for Interfacing LI-COR Radiation Sensors to Voltage-Reading Data Loggers | Tech tip that describes how to connect a light sensor to a voltage reader | tech tip |
Amplifying the Output Signal from LI-COR Radiation Sensors | Technical tip describing how to amplify the signal from LI-COR radiation sensors for use with other manufacturer's data logging devices. | tech tip |
Dimensional Drawing for Mounting LI-192 Underwater Quantum Sensor | This technical tip provides dimensional drawings that can be used to mount the LI-192 Underwater Quantum Sensor to a user-supplied mounting fixture. | tech tip |
Measuring PPFD and PPFFR With LI-COR Underwater Radiation Sensors | This technical tip describes how to mount two upward-facing underwater radiation sensors to the 2009S Lowering Frame to measure PPFD or PPFFR. | tech tip |
Obtaining Correct Values with LI-COR Underwater Radiation Sensors | Document describing how to ensure that you get correct values with underwater light sensors. | tech tip |