Overview of the communication system
In these instructions, the term terminal is used to refer to the Hughes 9502 satellite modem that connects your system to the internet.
What's what
If you have just taken delivery of the communication system, check the packing list to verify that you received everything that was ordered. The system includes an enclosure, satellite terminal, high-gain antenna, power cables, data cables, and hardware to support an LI-7500x or LI-7200x. The communication system is compatible with the LI-8100A Soil Gas Flux System.
Satellite terminal
Part number: 616-13655
Hughes 9502 satellite terminal. Includes antenna, terminal mounting strap, 10 m cable, cable adapter, and azimuth/elevation bracket.
Antenna mounting post
Part number: 9879-064
1.5 m (59 inch) anodized aluminum post with angled tip. To mount the antenna.
Power cable
Part number: 392-14582
5-meter power cable with bare leads.
Enclosure
Part number: 9979-025
An all-weather electronics enclosure to protect the instrumentation from the elements.
PVC strain relief fittings
Part number: 6579-054
Two PVC junction caps and locknuts (part number 259-13741) are included to provide strain relief for the antenna, power, and communication cables. They also help prevent water from splashing into the enclosure openings.
Metal wool
Three pieces of stainless steel or bronze wool are included. Insert these into the strain relief-cable openings to help prevent water from splashing into the enclosure and to keep insects and small animals out of the enclosure.
26 cm enclosure mounting kit
Part number: 9979-022
See Mounting the communication enclosure for a parts breakdown.
Shielded Ethernet cable
Part number: 392-13977
5 m (16.4 ft) network cable with straight RJ45 to 8-pin Turck® terminal.
Description | Qty. | Part Number |
---|---|---|
26 cm Enclosure w/ Internal Mounting Plate | 1 | 9979-025 |
M3 - 0.5x8 mm Stainless Steel Pan Screws | 4 | 150-13642 |
Enclosure Mounting Kit | 1 | 9979-022 |
1" PVC Strain Relief Fitting | 2 | 6579-054 |
1" Strain Relief Fitting Locknut | 2 | 259-13741 |
3.9 in (99 mm) Cable Ties | 10 | 218-08499 |
11.4 in (290 mm) Cable Ties | 10 | 218-11027 |
Cables | ||
Coaxial Antenna Cable (4.6 m; 15 ft) | 1 | 380-13839 |
8-pin Male to RJ45 Ethernet Cable (5 m; 16.4 ft) | 1 | 392-13977 |
Standard Ethernet Cable (2.1 m; 7 ft) | 1 | 616-06116 |
Some parts are shipped directly from Galaxy 1 Communications (Table 1‑2).
Hughes 9502 components
The Hughes 9502 includes a product information label on the bottom of the unit and important safety information on the top.
For additional information on the Hughes 9502 see http://www.hughes.com/technologies/mobilesat-systems/mobile-satellite-terminals/hughes-9502-bgan-m2m for these documents:
- Hughes 9502 Fixed Satellite Terminal User Guide
- Hughes 9502 Quick Setup Guide
Product labels
The satellite terminal includes a caution label that warns that the unit may become hot.
Cable connections and indicators
The cable connections are labeled below:
The indicator LEDs show the power, GPS, and signal status:
Status indicators
- Pointing Mode: All three LEDs flashing at 1 Hz.
- Registering: Power LED on, GPS LED on or flashing, Network LED off.
- Registered: Power LED on, GPS or, Network LED flashing.
- Connected: All three on; all three off after 1 minute time out.